1-7/8" Stainless Headers. Fox Body/SN95 Mustang 5.0L Coyote Swap w/Manual Trans.
Sale Price:
$1,315.01
***We are a built to order manufacturer and our focus is providing the best quality parts available. While our typical lead time is 4-6 weeks, some products may take up to 8 weeks to produce.***
SKU: 10512402 | material: 304 Stainless Steel |
color: Stainless Steel | tube diameter: 1.875 in. |
application: Automotive |
WARNING: This is a RACE ONLY product manufactured and sold for installation on vehicles to be used solely for competition purposes. Once this part is installed, the vehicle may never be used, or registered or licensed for use, on a public road or highway. If you install this part on your vehicle and use the vehicle on a public road or highway, you will violate the Clean Air Act 203(a)(3), 42 U.S.C, 7522(a)(3) and may be subject to personal civil or criminal liability, including fines of up to $4,819 per day.
WARNING: This product can expose you to chemicals including Chromium and Nickel, which are known to the State of California to cause cancer, birth defects or reproductive harm. For more information go to www.p65warnings.ca.gov
- 16GA 304 Stainless Steel construction
- Includes Gaskets and Headers bolts needed for installation
- For use with Manual transmissions w/ OEM style bellhousing
- Designed for use with Maximum Motorsports K-Member PN:MMKM-2.1 and STANDARD 4.6L motor mounts - Maximum Motorsports PN:6-504-BL
- Must use 1997-2000 Mustang 4.6L Starter - Ford P# SA848RM or Equivilent
- Requires REMOVAL of OEM TRANSMISSION CROSSMEMBER MOUNTS
- Recommended for use with STIFFLERS transmission crossmember
- Cannot be used with 2015 & Newer Coyote engines with Charge Motion Control Valves
- Cannot be used with OEM style rubber rag joint STEERING SHAFT
- Replaces PN's: 10502400, 10502401
- FOR AUTOMATIC TRANSMISSION USE PART# 10502402
Kooks Headers and Exhaust has been the leader in the High Performance Exhaust Industry for over 50 Years! Since 1962, Kooks takes pride in offering the best Headers and complete exhaust systems for your street, race and off-road applications. We have won hundreds of championships and set countless records in the NHRA, IHRA, NMCA, NMRA, NASCAR, NASA, SCCA and many other racing organizations. Now with three generations of family leadership, we are proud to say that all of our products are handcrafted here in the USA and we are proud to still be independently owned and operated. And don't forget, "Get Kookin with KOOKS!"
- Manufactured In The USA. Kooks Uses T304 Aircraft Quality Stainless Steel. Kooks Products are Backed by a Limited Lifetime Warranty To the Original Purchaser. Kooks Products Are Dyno And Race Tested and Designed For Maximum Power.